Pro Maintenance Additives
1-800-331-7374

How Much Do I Need?

Depending on the product, the amount needed can be worked out pretty easily. As the products are mixed with either the fuel (diesel or gasoline), or the oil (engine, transmission, differential or hydraulics) at a particular rate, some simple math can be applied to determine the correct size required. Below is the complete list of products with helpful information in determining which size is most applicable to your need.

Engine Blow-by Pack – Which Pack do I need?2023-12-10T22:32:44-07:00

Choose the most appropriate size Engine Blow-by Pack for your particular need. 5 size choices are available – Mini, Mini Plus, Small, Medium or Large Pack

The Engine Blow-by Pack is our most popular Value Pack because of the positive results it achieves in effectively reducing engine blow-by and increasing engine efficiency and performance. The pack contains 2 very effective products –

  • FTC Decarbonizer: a unique fuel catalyst – it enhances the combustion process of fuel (both gasoline and diesel), causing the fuel to burn much more completely (therefore much less soot formed), as well as oxidizing (burning off) all existing hard carbon within the combustion area, including piston crowns and ring grooves, cylinder walls (deglazes the cylinders), turbochargers etc.
  • Flushing Oil Concentrate: has a remarkable effect on un-sticking piston rings, especially the oil-control ring. By removing hard baked on sludge and carbon from the oil-control ring, it can once again seal correctly against the cylinder wall, reducing engine blow-by and oil use.

The Engine Blow-by Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Engine Blow-by Mini Pack

  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Flushing Oil Concentrate

This pack is usually suitable for small to mid-size vehicles and machinery; cars and light trucks, tractors, small boats, stationary generators, etc. with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to 16 quarts (4 gallons/19 liters) oil capacity and achieving approximately 15MPG (15L/100km) or better.

Mini Plus Pack contains –Maxodyne Engine Blow-by Mini Plus Pack

  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of Flushing Oil Concentrate

This pack is usually suitable for mid-size vehicles and machinery; light trucks, RVs, medium tractors and machinery, boats, etc. with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to 32 quarts (8 gallons/38 liters) oil capacity and achieving approximately 15MPG (15L/100km).

Small Pack contains –Maxodyne Engine Blow-by Small Pack

  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack is usually suitable for larger vehicles and machinery; medium to large trucks, large machinery, boats, etc. with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to 64 quarts (16 gallons/76 liters) oil capacity and achieving less than approximately 15MPG (15L/100km). This Small Pack is most popular with Truckers and Marine vessel operators.

Medium Pack contains –Maxodyne Engine Blow-by Medium Pack

  • 2 gallons of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack is most suitable for trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.

Large Pack contains –Maxodyne Engine Blow-by Large Pack

  • 4 gallons of FTC Decarbonizer
  • 64 fl oz of Flushing Oil Concentrate

This pack is usually suitable for small fleet operators with up to 3 or 4 trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.

 

This Pack is suitable for both gasoline and diesel engines.

(32 fl oz= 946 mL, 1 liter = 33.8 fl oz)

Stop Smoke Diesel Pack – Which Pack do I need?2023-12-13T14:26:30-07:00

Not sure which pack size to get? Choose the most appropriate Stop Smoke Diesel Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack

The Stop Smoke Diesel Pack contains these 3 heavy duty, very effective products –

  • ULS Diesel Enhancer – the ultimate in cleaning complete diesel fuel systems. It removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch. It eliminates engine rough idle and provides smoother operation throughout the full rev-range. It contains an upper cylinder lubricant to keep cylinders and pistons cooler, all the while reducing wear. ULS Diesel Enhancer is the perfect solution to the low lubricity problems faced by Ultra Low Sulfur Diesel fuel used in modern common rail diesel engines!
  • FTC Decarbonizer – acts as a truly unique and effective combustion catalyst to burn carbon from combustion and exhaust spaces, including catalytic convertors, Diesel Particulate Filters, Exhaust Gas Recirculation Valves and turbo chargers. It also removes hard carbon build up on pistons and cylinders – restoring cylinder compression – it de-glazes cylinder bores without needing to rebuild the engine!
  • Flushing Oil Concentrate – a heavy duty, solvent-free engine flush concentrate allows operators to restore full cleanliness to the entire crankcase, safely removing all engine sludge and freeing sticking piston rings to restore cylinder compression, and control engine blow-by and exhaust smoke. Use it at time of engine oil change.

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Stop Smoke Diesel Pack

  • 8 fl oz of ULS Diesel Enhancer
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most small to medium diesel powered vehicles or machines with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity. Typical vehicles/machines include diesel powered cars and SUV’s, 4-Wheel drives, small diesel powered pick-up trucks, small agricultural tractors, small marine engines, etc.

Mini Plus Pack contains –Maxodyne Stop Smoke Diesel Mini Plus Pack

  • 16 fl oz of ULS Diesel Enhancer
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most medium diesel powered vehicles or machines with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines include diesel powered 4-Wheel drives, many medium diesel powered pick-up trucks, RVs, small to medium agricultural tractors, medium marine engines, etc.

Small Pack contains –Maxodyne Stop Smoke Diesel Small Pack

  • 32 fl oz of ULS Diesel Enhancer
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most large diesel powered vehicles or machines with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to approximately 64 quarts (16 gallons/76 liters) of engine oil capacity. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors, large marine engines, etc.

Medium Pack contains –Maxodyne Stop Smoke Diesel Medium Pack

  • 64 fl oz of ULS Diesel Enhancer
  • 2 gallons of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack is most suitable for diesel powered trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer and 64 fl oz of ULS Diesel Enhancer keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.

Large Pack contains –Maxodyne Stop Smoke Diesel Large Pack

  • 1 gallon ULS Diesel Enhancer
  • 4 gallons of FTC Decarbonizer
  • 64 fl oz of Flushing Oil Concentrate

This pack is suitable for small fleet operators with up to 3 or 4 diesel powered trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.

 

This Pack is suitable for diesel engines only.

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Stop Smoke Gasoline Pack – Which Pack do I need?2023-12-13T14:20:41-07:00

Not sure which pack size to get? Choose the most appropriate Stop Smoke Gasoline Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack

The Stop Smoke Gasoline Pack contains 3 very effective products –

  • Cleanpower – the ultimate in cleaning complete fuel systems. It removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch. It eliminates engine rough idle and provides smoother operation throughout the full rev-range. It contains an upper cylinder lubricant to keep cylinders and pistons cooler, all the while reducing wear.
  • FTC Decarbonizer – acts as a truly unique combustion catalyst to burn carbon from combustion and exhaust spaces, including catalytic convertors and turbo chargers. It also removes hard carbon build up on pistons and cylinder bores, restoring cylinder compression – it de-glazes cylinders without needing to rebuild the engine!
  • Flushing Oil Concentrate – this unique product totally removes oil contaminants, including sludge, soot and other particles that act as heat-retaining, abrasive, component destroying substances, including hard carbon buildup that could only be chiseled off during a rebuild! It opens up oil galleries allowing oil to do its job – lubricate, cool and clean! And, it frees sticking piston rings!  Assists in fixing engine blow-by. Use it at the time of engine oil change.

Suitable for both gasoline and diesel engines.

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Stop Smoke Gasoline Mini Pack

  • 8 fl oz of Cleanpower
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most small to medium vehicles or machines with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity. Typical vehicles/machines include cars and SUV’s, 4-Wheel drives, small pick-up trucks, small agricultural tractors, small marine engines, etc.

Mini Plus Pack contains –Maxodyne Stop Smoke Diesel Mini Plus Pack

  • 16 fl oz of Cleanpower
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most medium vehicles or machines with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines include 4-Wheel drives, many medium diesel powered pick-up trucks, RVs, small to medium agricultural tractors, medium marine engines, etc.

Small Pack contains –Maxodyne Stop Smoke Gasoline Small Pack

  • 32 fl oz of Cleanpower
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack has been developed to suit most large vehicles or machines with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to approximately 64 quarts (16 gallons/76 liters) of engine oil capacity. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors, large marine engines, etc.

Medium Pack contains –Maxodyne Stop Smoke Gasoline Medium Pack

  • 64 fl oz of Cleanpower
  • 2 gallons of FTC Decarbonizer
  • 32 fl oz of Flushing Oil Concentrate

This pack is most suitable for  trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer and 64 fl oz of Cleanpower keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.

Large Pack contains –Maxodyne Stop Smoke Gasoline Large Pack

  • 1 gallon Cleanpower
  • 4 gallons of FTC Decarbonizer
  • 64 fl oz of Flushing Oil Concentrate

This pack is suitable for small fleet operators with up to 3 or 4  trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.

 

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Flushing Oil Concentrate & ULS Diesel Enhancer Value Pack – Which Pack do I need?2023-12-17T20:02:10-07:00

Not sure which pack size to get? Choose the most appropriate Flushing Oil Concentrate & ULS Diesel Enhancer Value Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.

These 2 products in this Diesel-Only Value Pack do an incredible job of restoring to ‘like new’ major components of the vehicle’s engine and fuel supply system. Reinvigorate your entire diesel engine – remove sludge and hard carbon from from all oil-wetted parts of the engine with Flushing Oil Concentrate, and restore power and performance by thoroughly cleaning the fuel system – injectors and fuel pump, with ULS Diesel Enhancer diesel fuel treatment!

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Flushing Oil Concentrate & ULS Diesel Enhancer Mini Value Pack

  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of ULS Diesel Enhancer

This Pack is ideal for smaller diesel-powered vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). Typical vehicles for this Pack could include small to medium passenger diesel-powered cars, SUV’s, 4-Wheel drives, small light trucks, small agricultural tractors, Bobcats/skidsteers, small marine engines etc.

 

Mini Plus Pack contains –Maxodyne Flushing Oil Concentrate & ULS Diesel Enhancer Mini Plus Value Pack

  • 16 fl oz of Flushing Oil Concentrate
  • 16 fl oz of ULS Diesel Enhancer

This Pack works well with most medium diesel-powered vehicles/machines having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines for this Pack might include many medium to large diesel-powered pick-up trucks, RVs, box trucks, medium agricultural tractors, medium marine engines, etc. A good Pack if you have a number of small vehicles or machines.

 

Small Pack contains –Maxodyne Flushing Oil Concentrate & ULS Diesel Enhancer Small Value Pack

  • 32 fl oz of Flushing Oil Concentrate
  • 32 fl oz of ULS Diesel Enhancer

This Pack has been developed to suit large diesel-powered vehicles/machines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters). Typical vehicles/machines for this Pack can include large heavy duty, hard-working diesel-powered vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc. This Pack might also be beneficial if you have a number of medium to large vehicles and machines.

 

Medium Pack contains –Maxodyne Flushing Oil Concentrate & ULS Diesel Enhancer Medium Value Pack

  • 64 fl oz of Flushing Oil Concentrate
  • 64 fl of ULS Diesel Enhancer

This Pack is designed for a small fleet of diesel-powered vehicles and machines. The fleet could include a number of vehicles, machines, boats etc, such as diesel-powered roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines, etc. These products in the Pack could be shared among the various machines.

 

Large Pack contains –Maxodyne Flushing Oil Concentrate & ULS Diesel Enhancer Large Value Pack

  • 1 gallon of Flushing Oil Concentrate
  • 1 gallon of ULS Diesel Enhancer

This Pack is designed for larger operations, including fleet operators or workshops, etc.  3 or 4 diesel-powered trucks or other equipment, or a combination of different types of diesel-powered machines, e.g. truck, excavator, dozer, crane, boat, etc.

 

This Pack is suitable for diesel engines only.

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

 

 

FTC Decarbonizer – How much do I need?2024-01-03T22:45:34-07:00

Choose the most appropriate FTC Decarbonizer size for your particular need. Various size options are available –

FTC Decarbonizer is added directly to the fuel tank (diesel or gasoline) at time of fill up.
It is recommended to use a ‘double dose’ for the first few tankfuls of fuel so that it can do a thorough job of oxidizing tough carbon deposits  in combustion areas as quickly and effectively as possible – this includes piston rings, ring grooves, exhaust valves, turbochargers, piston crowns, and deglazing cylinder bores. The amount or the severity of the hard carbon deposits will determine how quickly the oxidizing process takes – if there is not much carbon build up, the results will be achieved sooner than if there is a large amount of carbon build up to be oxidized. Every engine is different in this respect. Thereafter, the single dose rate can be used to continue to clean further deposits, and to keep the complete combustion area clean and working efficiently, particularly significantly reducing the production of engine-destroying soot. Continued use over time ensures maximum fuel efficiency and power, smooth engine operation, and less harmful emissions/exhaust smoke – all resulting in longer engine life and lower ongoing maintenance costs.

Large diesel engines: e.g. over 9.0 liter/550 cubic inch engine displacement
Add 16 fl oz per 100 gallons for the first few tankfuls of fuel (500 mL per 400 liters of fuel).

Thereafter, add 8 fl oz per 100 gallons of fuel (250 mL per 400 liters of fuel).

Small diesel & gasoline engines:
Add 1.6 fl oz per 10 gallons for the first few tankfuls  of fuel (50ml per 40 liters of fuel).

Thereafter, add 0.8 fl oz per 10 gallons of fuel (25 mL per 40 liters of fuel).

 

As a rule of thumb, and depending on the engine’s fuel consumption rate, the following is usually helpful in determining which size is most suitable for your application –

  • 16 fl oz of FTC Decarbonizer is usually enough to treat all small engines up to approximately 3.0 liter engine capacity (185 Cubic Inch) – passenger car, SUV, small tractor, or similar machines/boats etc.
  • 32 fl oz of FTC Decarbonizer is usually enough to treat all engines up to approximately 6.0 liter engine capacity (370 Cubic Inch) –  small to mid-size trucks, RV’s, large gasoline engines, tractors, or similar machines/boats etc.
  • 64 fl oz of FTC Decarbonizer is usually enough to treat all engines up to approximately 9.0 liter engine capacity (550 Cubic Inch) – medium trucks, RV’s, tractors, or similar machines/boats etc.
  • 1 gallon & 2 gallons of FTC Decarbonizer is usually enough to treat all engines over 9.0 liter engine capacity (over 550 Cubic Inch) – large trucks, tractors, other machine/boats etc.

Maxodyne FTC Decarbonizer

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

 

Flushing Oil Concentrate & Cleanpower Value Pack – Which Pack do I need?2023-12-17T19:52:00-07:00

Not sure which Pack size to get? Choose the most appropriate size Flushing Oil Concentrate & Cleanpower Value Pack for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.

These 2 products do an incredible job of restoring to ‘like new’ major components of the vehicle’s engine and fuel supply system. Reinvigorate your entire engine – remove sludge and hard carbon from from all oil-wetted parts of the engine with Flushing Oil Concentrate, and restore power and performance by thoroughly cleaning the fuel system – injectors and fuel pump, with Cleanpower super concentrated fuel treatment!

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Flushing Oil Concentrate & Cleanpower Mini Value Pack

  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of Cleanpower

This Pack is ideal for smaller vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). Typical vehicles for this Pack could include small to medium passenger cars, SUV’s, 4-Wheel drives, small light trucks, small agricultural tractors, Bobcats/skidsteers, small marine engines etc.

 

Mini Plus Pack contains –Maxodyne Flushing Oil Concentrate & Cleanpower Mini Plus Value Pack

  • 16 fl oz of Flushing Oil Concentrate
  • 16 fl oz of Cleanpower

This Pack works well with most medium vehicles/machines having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines for this Pack might include many medium to large pick-up trucks, RVs, box trucks, medium agricultural tractors, medium marine engines, etc. A good Pack if you have a number of small vehicles or machines.

 

Small Pack contains –Maxodyne Flushing Oil Concentrate & Cleanpower Small Value Pack

  • 32 fl oz of Flushing Oil Concentrate
  • 32 fl oz of Cleanpower

This Pack has been developed to suit large vehicles/machines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters). Typical vehicles/machines for this Pack can include large heavy duty, hard-working vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc. This Pack might also be beneficial if you have a number of medium to large vehicles and machines.

 

Medium Pack contains –Maxodyne Flushing Oil Concentrate & Cleanpower Medium Value Pack

  • 64 fl oz of Flushing Oil Concentrate
  • 64 fl of Cleanpower

This Pack is designed for a small fleet of vehicles and machines. The fleet could include a number of vehicles, machines, boats etc, such as roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines, etc. These products in the Pack could be shared among the various machines.

 

Large Pack contains –Maxodyne Flushing Oil Concentrate & Cleanpower Large Value Pack

  • 1 gallon of Flushing Oil Concentrate
  • 1 gallon of Cleanpower

This Pack is designed for larger operations, including fleet operators or workshops, etc.  3 or 4 trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc

 

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Flushing Oil Concentrate – How much do I need?2024-01-18T10:18:18-07:00

Choose the most appropriate Flushing Oil Concentrate size for your particular need. Various size options are available –

Flushing Oil Concentrate is added directly to the oil immediately prior to the oil change. It is not recommended to be added to the oil and ran for extended periods of time. For the very best results, we recommend the following treatment rates –

Initial/Dirty Engine concentrated flush: add Flushing Oil Concentrate to the engine oil at 0.5 fl oz per quart of clean engine oil (12.5 mL per liter of engine oil).

  • 8 fl oz of Flushing Oil Concentrate treats a maximum of 16 quarts (4 gallons/19 liters) of oil
  • 16 fl oz of Flushing Oil Concentrate treats a maximum of 32 quarts (8 gallons/38 liters) of oil
  • 32 fl oz of Flushing Oil Concentrate treats a maximum of 64 quarts (16 gallons/76 liters) of oil
  • 64 fl oz of Flushing Oil Concentrate treats a maximum of 128 quarts (32 gallons/151 liters) of oil
  • 1 Gallon of Flushing Oil Concentrate treats a maximum of 256 quarts (64 gallons/302 liters) of oil

Basically, the initial, hard-working, concentrated flush breaks down and suspends heavy, baked-on sludge – the sludge that causes piston oil-rings to block up and stick in the grooves, oil pumps to reduce pressure, and oil galleries to be restricted.  It also dissolves the clumps of hardened sludge on the oil pan and other crankcase components. It assists in the breakdown of hard carbon on the piston skirts, lower compression ring and cylinder walls.

Continuing maintenance oil change flush (i.e. subsequent maintenance oil changes after the initial concentrated flush): add Flushing Oil Concentrate to the engine oil at 1/10th fl oz per quart of engine oil (2.5 mL per liter of engine oil).

Instructions:
INITIAL TREATMENT/DIRTY ENGINES

Bring engine to FULL operating temperature. Drain old oil and refill with new, clean oil (this can be inexpensive oil for this purpose). It is a good idea to replace the oil filter/s at this time as possible heavy contamination of the existing filter may occur during the flushing process. Operate the engine to warm up the oil again, then add Flushing Oil Concentrate to engine oil at 0.5 fl oz per quart (12.5 mL per liter) of engine oil. Run the engine at a fast idle, stationary, for 45 minutes. For most small and medium size engines, this means 1500 – 2000 RPM. For larger size engines (e.g. over 9.0 liter/550 cubic inch engine displacement), run at about 1200 RPM. After 45 minutes, stop the engine and drain the engine oil while the engine is still hot. Replace oil filter. Refill with quality engine oil.

Example:

  • 5 quart/liter oil capacity = 2.5 fl oz (60 mL) Flushing Oil Concentrate
  • 5 gallon (20 liter) oil capacity = 10 fl oz (250 mL) Flushing Oil Concentrate
  • 10 gallon (40 liter) oil capacity = 20 fl oz (500 mL) Flushing Oil Concentrate

CONTINUING MAINTENANCE

Bring engine to FULL operating temperature. Add Flushing Oil Concentrate to existing engine oil at 0.1 fl oz per quart  (2.5 mL per liter) of engine oil. Drive/operate normally for 30 – 60 minutes, then continue with normal oil change while the engine is still hot.

Example:

  • 5 quart/liter oil capacity = 0.5 fl oz (12.5 mL) Flushing Oil Concentrate
  • 5 gallon (20 liter) oil capacity = 2 fl oz (50 mL) Flushing Oil Concentrate
  • 10 gallon (40 liter) oil capacity = 4 fl oz (100 mL) Flushing Oil Concentrate

Occasionally, on an engine with years or decades of sludge build up, a second follow up concentrated flush may be required soon after the initial flush (600 – 1200 miles, 1000 – 2000km). It is suggested to add Flushing Oil Concentrate to clean oil (as per instructions for the “Initial Treatment/Dirty Engines”), at a rate of 0.25 (1/4) fl oz Flushing Oil Concentrate per quart of engine oil (6.25 mL per liter of engine oil). Operate the engine normally for between 4 – 6 hours, then drain the oil while hot, replace oil filters, and fill with quality oil.

Detailed information can be found HERE.

Maxodyne Flushing Oil Concentrate

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

 

Diesel Performance Pack – Which Pack do I need?2023-12-15T08:56:31-07:00

Not sure which pack size to get? Choose the most appropriate Diesel Performance Pack size for your particular need – Mini, Small Pack, Medium or Large Pack.

This Diesel Only performance pack contains these 3 extremely effective products that increase engine and transmission efficiency and power, whilst significantly reducing maintenance costs over the life of the vehicle or machine –

  • AW10 Antiwear – formulated to deliver tremendous increases in lubricant load carrying ability, wear reduction and friction/heat reduction.
  • FTC Decarbonizer – acts as a combustion catalyst to burn carbon from combustion and exhaust spaces, turbos and DPF’s, burning fuel faster, easier and cleaner!
  • ULS Diesel Enhanceran extremely effective fuel system treatment for all diesel powered engines, and effectively overcomes most problems associated with Low-Sulfur Diesel fuel and modern, high pressure diesel fuel injector systems.

This Value Pack is available in 4 different size combinations:

Mini Pack contains –Maxodyne Diesel Performance Pack Mini

  • 16 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of ULS Diesel Enhancer

This pack has been developed to suit most small to medium diesel-powered vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include diesel-powered cars and SUV’s, 4-wheel drives, small to medium diesel-powered pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.

Small Pack contains –Maxodyne Diesel Performance Pack Small

  • 32 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of ULS Diesel Enhancer

This pack has been developed to suit most small to medium diesel-powered vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include diesel-powered 4-wheel drives, medium diesel-powered pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.

 

Medium Pack contains –Maxodyne Diesel Performance Pack Medium

  • 32 fl oz of AW10 Antiwear
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of ULS Diesel Enhancer

This pack has been developed to suit most medium to large diesel-powered vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include diesel-powered box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines , etc.

 

Large Pack contains –Maxodyne Diesel Performance Pack Large

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of ULS Diesel Enhancer

This pack has been developed to suit most large diesel-powered vehicles/machines with engines over 9.0-liter engine displacement (over 550 cubic inch), with large engine and transmission oil capacities, and multiple differentials, final drives, etc. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors and similar machines, etc.

 

This Pack is suitable for diesel powered vehicles/machines only.

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

ULS Diesel Enhancer – How much do I need?2023-12-10T22:28:58-07:00

Choose the most appropriate ULS Diesel Enhancer size for your particular need. Various size options are available –

ULS Diesel Enhancer is added directly to the fuel tank (diesel only) at time of fill up.

Treatment rate: 1:8000. Add 0.16 fl oz per 10 gallons of fuel (5 mL per 40 liters of fuel)

Example:

  • 10 gallons of fuel – add 0.16 fl oz (40 liters of fuel – add 5 mL)
  • 40 gallons of fuel – add 0.6 fl oz (100 liters of fuel – add 12.5 mL)
  • 80 gallons of fuel – add 1.2 fl oz (300 liters of fuel – add 37.5 mL)
  • 150 gallons of fuel – add 2.4 fl oz (500 liters of fuel   – add 62.5 mL)

As a rule of thumb, and depending on the fuel consumption rate the engine achieves, the following is usually helpful in determining which size is most suitable for your application –

  • 8 fl oz – treats up to 500 gallons (1900 liters) of diesel. This is usually enough to treat diesel-powered cars, small to medium pickup trucks, small agricultural tractors & machinery, small boats, small generators, etc.
  • 16 fl oz – treats up to 1000 gallons (3800 liters) of diesel. This is usually enough to treat diesel-powered mid-size pickup trucks, box trucks, small RVs, medium agricultural tractors & machinery, medium boats, generators, etc.
  • 32 fl oz – treats up to 2000 gallons (7600 liters) of diesel. This is usually enough to treat diesel-powered large trucks, RVs, large agricultural tractors & machinery, large excavators, dozers, large boats, etc.
  • 64 fl oz – treats up to 4000 gallons (15,000 liters) of diesel. This is usually enough to treat 2 or 3 diesel-powered trucks, or a combination of trucks and other machines, boats, etc.
  • 1 Gallon – this is usually enough to treat a number of diesel-powered large trucks & machinery, combinations of various machinery and/or boats, Fleet & workshops, etc.

Maxodyne ULS Diesel Enhancer

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

 

Gasoline Performance Pack – Which Pack do I need?2023-12-15T08:36:27-07:00

Not sure which pack size to get? Choose the most appropriate size Gasoline Performance Pack for your particular need – Mini, Small, Medium or Large Pack.

This Performance Pack contains these 3 extremely effective products that increase engine and transmission efficiency and power, while significantly reducing maintenance costs over the life of the vehicle or machine –

  • AW10 Antiwear delivers tremendous increases in lubricant load carrying ability, wear reduction and friction/heat reduction!
  • FTC Decarbonizer acts as a combustion catalyst to burn carbon from combustion and exhaust spaces, turbos and EGR’s, burning fuel faster, easier and cleaner!
  • Cleanpower is a super concentrated product, remarkably effective as a complete fuel system and injector cleaner. Most injectors don’t need replacing … Just a thorough clean!

This Value Pack is available in 4  different size combinations:

Mini Pack contains Maxodyne Gasoline Performance Pack Mini

  • 16 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Cleanpower

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.


Small Pack
contains –Maxodyne Gasoline Performance Pack Small

  • 32 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Cleanpower

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.

Medium Pack contains –Maxodyne Gasoline Performance Pack Medium

  • 32 fl oz of AW10 Antiwear
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of Cleanpower

This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.

 

Large Pack contains –Maxodyne Stop Smoke Gasoline Pack Large

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Cleanpower

This pack has been developed to suit most large vehicles/machines with engines over 9.0-liter engine displacement (over 550 cubic inch), with large engine and transmission oil capacities, and multiple differentials, final drives, etc. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors and similar machines, etc.

 

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

 

 

Cleanpower Super-concentrated Fuel Treatment – How much do I need?2024-01-03T22:43:11-07:00

Choose the most appropriate Cleanpower size for your particular need. Various size options are available –

Cleanpower Super-concentrated Fuel Treatment is added directly to the fuel tank (diesel or gasoline) at time of fill up.

It is recommended to use a ‘double dose’ (1:4000) for the first few tankfuls of fuel, so that it can do a thorough job of removing tough deposits on injector tips quickly. After that, the single dose rate (1:8000) can be used to continue to clean further deposits, and to keep the complete fuel system clean, and the injectors delivering fuel as designed by the vehicle’s manufacturer. Continued use will ensure maximum fuel efficiency & power, smooth engine operation,  and less harmful emissions/exhaust smoke – all resulting in longer engine life and lower ongoing maintenance costs.

Initial treatment rate: 1:4000

Large diesel engines: e.g. over 9.0 liter/550 cubic inch engine displacement
Add 3.2 fl oz per 100 gallons of fuel for the first few tankfuls of fuel (100 mL per 400 liters of fuel)

Thereafter (rate 1:8000): add 1.6 fl oz per 100 gallons of fuel (50 mL per 400 liters of fuel)

Small diesel & gasoline engines:
Add 0.3 fl oz per 10 gallons for the first few tankfuls of fuel (10 mL per 40 liters of fuel)

Thereafter (rate 1:8000): add 0.15 fl oz per 10 gallons of fuel (5 mL per 40 liters of fuel)

As a rule of thumb, and depending on the fuel consumption rate the engine achieves, the following is usually helpful in determining which size is most suitable for your application –

  • 8 fl oz – can treat up to 500 gallons (1900 liters) of fuel. This is usually enough to treat cars, small to medium pickup trucks, small agricultural tractors & machinery, small boats, small generators, etc.
  • 16 fl oz – can treat up to 1000 gallons (3800 liters) of fuel. This is usually enough to treat mid-size pickup trucks, box trucks, small RVs, medium agricultural tractors & machinery, medium boats, generators, etc.
  • 32 fl oz – can treat up to 2000 gallons (7600 liters) of fuel. This is usually enough to treat large trucks, RVs, large agricultural tractors & machinery, large excavators, dozers, large boats, etc.
  • 64 fl oz – can treat up to 4000 gallons (15,000 liters) of fuel. This is usually enough to treat 2 or 3 large trucks, or a combination of trucks and other machines, boats, etc.
  • 1 Gallon – this is usually enough to treat a number of large trucks & machinery, combinations of various machinery and/or boats, Fleet & workshops, etc

Maxodyne Cleanpower(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Ultimate Diesel Pack – Which Pack do I need?2023-12-16T17:35:39-07:00

Not sure which pack size to get? Choose the most appropriate Ultimate Diesel Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.

The Ultimate Diesel Pack contains AW10 Antiwear, FTC Decarbonizer, ULS Diesel Enhancer, Flushing Oil Concentrate, and RMI-25 Cooling System Treatment. It is designed as a whole-of-vehicle pack; it is the ultimate in safeguarding your diesel-powered vehicle or machine  against increased stress and wear on all major components, including all lubricated parts (comprising engine, transmission, differential, final drive, power steering and hydraulics), It also restores and cleans the complete fuel system (fuel pump, injectors, fuel lines), combustion spaces and exhaust system (turbocharger, diesel oxidation catalyst, Diesel Particulate Filter, emission sensors, etc). And RMI-25 is a total pour in/drive-away system which extends antifreeze effectiveness, cleans rust and scale, and prevents water pump and radiator failure.

This combination of products is designed to restore or maintain ‘like-new’ performance, and significantly increase the service life of the vehicle or machine and its components.

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Ultimate Diesel Mini Pack

  • 16 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of ULS Diesel Enhancer
  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.

Mini Plus Pack contains –Maxodyne Ultimate Diesel Mini Plus Pack

  • 32 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of ULS Diesel Enhancer
  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.

Small Pack contains –Maxodyne Ultimate Diesel Small Pack

  • 32 fl oz of AW10 Antiwear
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of ULS Diesel Enhancer
  • 16 fl oz of Flushing Oil Concentrate
  • 16 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.

Medium Pack contains –Maxodyne Ultimate Diesel Medium Pack

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of ULS Diesel Enhancer
  • 16 fl oz of Flushing Oil Concentrate
  • 32 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit some larger vehicles/machines with engines over approximately 9.0-liter engine displacement (550 cubic inch), with medium to large engine, transmission/differential and hydraulic oil capacitiesTypical vehicles/machines might include roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines etc.

Large Pack contains –Maxodyne Ultimate Diesel Large Pack

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of ULS Diesel Enhancer
  • 32 fl oz of Flushing Oil Concentrate
  • 32 fl oz of RMI-25 Cooling System Treatment

 

This Pack is suitable for diesel engines only.

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

AW10 Antiwear – How much do I need?2023-12-19T11:00:20-07:00

Choose the most appropriate AW10 Antiwear size for your particular need. Various size options are available –

AW10 Antiwear is added directly to the lubricating oil – engine, transmission (automatic or manual), differential, final drive and hydraulic oils.

Treatment rate:

  • Engines: add at 2% of lubricating oil capacity
  • Manual transmissions, differential, final drives: add at 5% of lubricating oil capacity
  • Automatic transmissions & hydraulics: add at 1% of lubricating oil capacity

As a rule of thumb, and depending on the vehicle’s oil capacities, the following is usually helpful in determining which size is most suitable for your application –

  • 8 fl oz & 16 fl oz – Suitable quantities for cars & small to medium SUV’s, small trucks, etc
  • 32 fl oz & 64 fl oz – Suitable quantities for medium trucks, RV’s, 4 Wheel-drives, etc
  • 1 Gallon – Suitable quantity for large trucks & machinery, Fleet & workshops etc

Below is a chart that may be helpful to determine how much you need depending on your vehicle’s oil capacity.

Maxodyne AW10 Antiwear Treatment Chart
Maxodyne AW10 Antiwear(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Ultimate Gasoline Pack – Which Pack do I need?2023-12-15T22:09:47-07:00

Not sure which pack size to get? Choose the most appropriate size Ultimate Gasoline Pack for your particular need.

The Ultimate Gasoline Pack contains AW10 Antiwear, FTC Decarbonizer, Cleanpower, Flushing Oil Concentrate, and RMI-25 Cooling System Treatment. It is designed as a whole-of-vehicle pack; it is the ultimate in safeguarding your vehicle or machine against increased stress and wear on all major components, including all lubricated parts (including engine, transmission/driveline, and power steering). It also restores and cleans the complete fuel system (fuel pump, injectors, carburetors, fuel lines), combustion spaces and exhaust system (turbocharger, catalytic converter, oxygen sensors, etc). And RMI-25 is a total pour in/drive-away system which extends antifreeze effectiveness, cleans rust and scale, and prevents water pump and radiator failure.

This combination of products is designed to restore and maintain ‘like-new’ performance, and significantly increase the service life of the vehicle or machine.

This Value Pack is available in 5 different size combinations:

Mini Pack contains –Maxodyne Ultimate Gasoline Mini Pack

  • 16 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Cleanpower
  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.

Mini Plus Pack contains –Maxodyne Ultimate Gasoline Mini Plus Pack

  • 32 fl oz of AW10 Antiwear
  • 32 fl oz of FTC Decarbonizer
  • 8 fl oz of Cleanpower
  • 8 fl oz of Flushing Oil Concentrate
  • 8 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.

Small Pack contains –Maxodyne Ultimate Gasoline Small Pack

  • 32 fl oz of AW10 Antiwear
  • 64 fl oz of FTC Decarbonizer
  • 16 fl oz of Cleanpower
  • 16 fl oz of Flushing Oil Concentrate
  • 16 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.

Medium Pack contains –Maxodyne Ultimate Gasoline Medium Pack

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Cleanpower
  • 16 fl oz of Flushing Oil Concentrate
  • 32 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit some larger vehicles/machines with engines over approximately 9.0-liter engine displacement (550 cubic inch),with medium to large engine, transmission/differential and hydraulic oil capacitiesTypical vehicles/machines might include roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines etc.

Large Pack contains –Maxodyne Ultimate Gasoline L:arge Pack

  • 1 gallon of AW10 Antiwear
  • 1 gallon of FTC Decarbonizer
  • 32 fl oz of Cleanpower
  • 32 fl oz of Flushing Oil Concentrate
  • 32 fl oz of RMI-25 Cooling System Treatment

This pack has been developed to suit large vehicles/machines with engines over 9.0 liter engine displacement (over 550 cubic inch), with large transmissions, multiple large differentials, final drives, and hydraulic systems. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc.

 

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Marine Diesel Stabilizer – How much do I need?2023-12-19T12:15:01-07:00

For marine diesel use only. Add directly to the diesel fuel tank.

Click here for Printable Treatment Rate Chart (U.S. Customary & Metric)

Standard Treatment Rate :  1:1200

16 fl oz treats 150 gallons (568 liters) of diesel

32 fl oz treats 300 gallons (1135 liters) of diesel

64 fl oz treats 600 gallons (2270 liters) of diesel

1 gallon treats 1200 gallons (4540 liters) of diesel

 

Boost Treatment Rate1:600

For badly contaminated tanks and  “Long Term” storage to prevent diesel oxidation.

16 fl oz treats 75 gallons (284 liters) of diesel

32 fl oz treats 150 gallons (568 liters) of diesel

64 fl oz treats 300 gallons (1135 liters) of diesel

1 gallon treats 600 gallons (2270 liters) of diesel

Maxodyne Marine Diesel Stabilizer

32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Overheating Value Pack – Which Pack do I need?2023-12-15T09:39:47-07:00

Not sure which pack size to get? Choose the most appropriate size Overheating Value Pack for your particular need – Mini, Small, Medium or Large Pack.

The pack contains –

RMI-25 Cooling System Treatment – a very low-cost, extremely effective defense against cooling system failure in all engines. It is a total pour in/drive-away system which extends antifreeze effectiveness, increases water filter longevity, and has no disposal costs when used with water only.

AW10 Antiwear  provides a massive strength increase to engine, transmission and hydraulic oils. In doing so, there is a huge reduction in frictional heat generation allowing components to remain much cooler.

The Flushing Oil Concentrate in this pack dissolves and suspends contaminants and sludge, allowing lubricating oil to flow more freely – dissipating heat and effectively resulting in cooler running temperatures and longer service life. Use at time of oil change.

This Value Pack is available in 4 different size combinations:

Mini Pack contains –Maxodyne Overheating Value Pack Mini

  • 8 fl oz RMI-25
  • 16 fl oz AW10 Antiwear
  • 8 fl oz Flushing Oil Concentrate

This pack has been developed to suit most small to medium vehicles/machines having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity, and larger capacity transmissions and multiple differentials. 8 fl oz of RMI-25 will treat up to 5 gallons cooling system capacity. Typical vehicles/machines include most passenger cars, 4-wheel drives, many small to medium size pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.

Small Pack contains –Maxodyne Overheating Value Pack Small

  • 8 fl oz RMI-25
  • 32 fl oz AW10 Antiwear
  • 8 fl oz Flushing Oil Concentrate

This Pack is cost effective and suitable for medium vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). With this Pack, these vehicles or machines can achieve numerous engine oil flushes with the Flushing Oil Concentrate (depending, of course, on engine oil capacity) and have enough AW10 Antiwear to treat the entire oil-lubricated parts of the vehicle – engine, transmission/transaxle, differentials, and transfer case if applicable. 8 fl oz of  RMI-25 will treat up to 5 gallons cooling system capacity. Not only is this Pack particularly popular with many Four-Wheel Drive enthusiasts who often push their vehicles to the limits in extremely harsh conditions, but it is a ‘must-have‘ for operators of medium size pick-up trucks that regularly tow large trailers and 5th wheels. These products really help keep temperatures under control in the engine, transmission (automatic or manual) and differentials, and ensure reliable performance under very heavy working conditions! Typical vehicles/machines include many medium size pick-up trucks, medium size agricultural machines and other off-road vehicles, and similar machines, etc.

Medium Pack contains –Maxodyne Overheating Value Pack Medium

  • 16 fl oz RMI-25
  • 32 fl oz AW10 Antiwear
  • 16 fl oz Flushing Oil Concentrate

This Pack can adequately treat a wide variety of vehicles and machines. There is enough RMI-25 to treat a cooling system up to 8 gallons, and enough Flushing Oil Concentrate to adequately flush up to 32 quarts (8 gallons/38 liters) engine oil capacity, and enough AW10 Antiwear to treat a combination of engines, transmissions, differentials, final drives, and hydraulics on many heavy duty, hardworking vehicles and machines.

Large Pack contains –Maxodyne Overheating Value Pack Large

  • 32 fl oz RMI-25
  • 1 gallon AW10 Antiwear
  • 32 fl oz Flushing Oil Concentrate

This very popular Pack is just right for all larger vehicles/engines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters), and large capacity transmissions (automatic or manual), differentials, final drives, transfer cases, and hydraulics. This Pack is appropriate for large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, cranes, large off-road machines, construction vehicles, etc.

 

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

RMI-25 – How much do I need?2024-02-29T13:00:00-07:00

Unlike other cooling systems treatments, it is impossible to put too much RMI-25 Cooling System Treatment in your radiator. Theoretically, you could run 100% RMI-25 in your radiator and the only difference would be quicker results. In practice though, most cooling systems usually require an antifreeze component sufficient to effectively reduce the freezing point of the coolant in cold climate areas.

Add RMI-25 Cooling System Treatment directly to the engine’s cooling system’s radiator.

It is recommended to add 8 fl oz of RMI-25 for a cooling system with a capacity up to 5 gallons/19 Liters.

For cooling systems above 5 gallons, it is recommended to use a minimum treatment of 2 fl oz per gallon of coolant capacity. When used with distilled water only, and no antifreeze, it is recommended to double this treatment rate, i.e. 4 fl oz per gallon.

Select the most appropriate size RMI-25 for your particular need. Identify your engine’s coolant capacity and choose from the various size options available –

  • 8 fl oz – can treat up to 5 gallons (19 litres). This is usually enough to treat regular cars, small pickup trucks, small agricultural tractors & machinery, commercial generators, etc.
  • 16 fl oz – can treat up to 8 gallons (30 liters). This is usually enough to treat medium to some larger pickup trucks, and similar sized agricultural and other off-road machines.
  • 32 fl oz – can treat up to 16 gallons (60 liters). This is usually enough to treat medium to large trucks, RVs, medium agricultural tractors & machinery, excavators, dozers, large ‘inboard’ motorboats, etc.
  • 64 fl oz – can treat up to 32 gallons (120 liters). This is usually enough to treat larger trucks, agricultural tractors, and other similar large machinery etc, large commercial generators, or a combination of several different engines.
  • 1 gallon – can treat up to 64 gallons (240 liters). This is usually enough to treat several large trucks & machinery, combinations of various vehicles, earthmovers, motorboats, truck or machinery fleets, etc.

Test cooling system pH level every 15,000 miles (24,000 Km) or 300 hours, and if necessary, re-treat the cooling system with RMI-25. Correct pH is 8.2 – 10. Simply use pH Test Strips to test.

Engines requiring antifreeze in the cooling system should have the ‘freeze point’ of the cooling system fluid checked during regular maintenance schedules.

STORE ABOVE FREEZING 32°F   (0°C)

RMI-25 Line-up

 

 

 

 

 

 

 

 

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

2023-12-10T18:17:45-07:00

Title

Go to Top